Mogami W3082 high-definition, super flexible studio speaker cable is paired with a unique oxygen-free copper cored plug in this high-quality cable assembly. The construction of the plug provides a direct soldering interface to the oxygen-free copper plug tip for end-to-end pure copper conduction. With no dissimilar materials in between the cable core and plug tip to alter your sound, you end up with the cleanest possible audio reproduction.

Mogami W3082 High Clarity Speaker cable features:

• Professional, studio grade speaker cable, built to order in west Michigan
• Various lengths available; custom lengths available upon request
• Mogami W3082 super flexible studio speaker cable; oxygen-free copper coax configuration offers self-shielding, and effectively produces 14AWG wire for superior signal transfer
• Made in the USA, nickel-plated G&H High Clarity plugs; eliminates dissimilar solder tab as found in other plugs replacing it with an oxygen-free copper tab press-fit to the oxygen-free copper core, providing end-to-end oxygen-free copper conductivity
• Limited lifetime warranty

Mogami W3082 Super Flexible Studio Speaker Cable

Coaxial Design is used to provide as large a conductor size as possible, which results in the following features:

• Large conductor size of 2.0mm (close to #14AWG) despite small OD of 6.5mm (0.256″). (Same conductor size for both internal and external (shield) conductors.)
• Oxygen-free copper, and durable outer jacket
• Better sound quality than quad or regular parallel configuration.

G&H High Clarity Plugs

The G&H High Clarity plugs are an extension of the original “Bigfoot” series 1/4” TS plugs. By eliminating the solder tab your signal has a more direct path producing a cleaner sound. The BF2PM series retains the solid, separately crimped ground of the BF2P and it’s insert molded design assure the highest reliability.

It starts with an OFC copper core for maximum conductivity. The copper is expanded into the tip for a solid connection. Then it, along with the plug body are placed into a plastic mold. The insulating material is injected into them forming a solid assembly.

Detailed Description:

• Made in the USA
• OFC copper core for highest conductivity
• 1/2” profile for highest packing density
• Tin plated ground for ease of soldering
• Solid brass housing protects the plug with attractive gun metal finish
• Separately crimped ground won’t loosen
• Hot solders directly to the copper core for clean signal transmission

Recommended maximum cable length

Calculation based on total cable resistance not exceeding 5% of speaker load impedance.

Mogami W3082 is 14AWG, and specs at 27mOhm/foot

4 ohm load – 40 feet

8 ohm load – 75 feet

16 ohm load – 150 feet

You may use the provided lengths as general guidance. If you need to run longer cables with stated loads, it is best to move up in size to the next larger gauge (smaller number) cable.

Mogami W3082 high-definition, super flexible studio speaker cable is paired with a unique oxygen-free copper cored plug in this high-quality cable assembly. The construction of the plug provides a direct soldering interface to the oxygen-free copper plug tip for end-to-end pure copper conduction. With no dissimilar materials in between the cable core and plug tip to alter your sound, you end up with the cleanest possible audio reproduction.

Mogami W3082 High Clarity Speaker cable features:

• Professional, studio grade speaker cable, built to order in west Michigan
• Various lengths available; custom lengths available upon request
• Mogami W3082 super flexible studio speaker cable; oxygen-free copper coax configuration offers self-shielding, and effectively produces 14AWG wire for superior signal transfer
• Made in the USA, nickel-plated G&H High Clarity plugs; eliminates dissimilar solder tab as found in other plugs replacing it with an oxygen-free copper tab press-fit to the oxygen-free copper core, providing end-to-end oxygen-free copper conductivity
• Limited lifetime warranty

Mogami W3082 Super Flexible Studio Speaker Cable

Coaxial Design is used to provide as large a conductor size as possible, which results in the following features:

• Large conductor size of 2.0mm (close to #14AWG) despite small OD of 6.5mm (0.256″). (Same conductor size for both internal and external (shield) conductors.)
• Oxygen-free copper, and durable outer jacket
• Better sound quality than quad or regular parallel configuration.

G&H High Clarity Plugs

The G&H High Clarity plugs are an extension of the original “Bigfoot” series 1/4” TS plugs. By eliminating the solder tab your signal has a more direct path producing a cleaner sound. The BF2PM series retains the solid, separately crimped ground of the BF2P and it’s insert molded design assure the highest reliability.

It starts with an OFC copper core for maximum conductivity. The copper is expanded into the tip for a solid connection. Then it, along with the plug body are placed into a plastic mold. The insulating material is injected into them forming a solid assembly.

Detailed Description:

• Made in the USA
• OFC copper core for highest conductivity
• 1/2” profile for highest packing density
• Tin plated ground for ease of soldering
• Solid brass housing protects the plug with attractive gun metal finish
• Separately crimped ground won’t loosen
• Hot solders directly to the copper core for clean signal transmission

Recommended maximum cable length

Calculation based on total cable resistance not exceeding 5% of speaker load impedance.

Mogami W3082 is 14AWG, and specs at 27mOhm/foot

4 ohm load – 40 feet

8 ohm load – 75 feet

16 ohm load – 150 feet

You may use the provided lengths as general guidance. If you need to run longer cables with stated loads, it is best to move up in size to the next larger gauge (smaller number) cable.

Mogami W3082 high-definition, super flexible studio speaker cable is paired with a unique oxygen-free copper cored plug in this high-quality cable assembly. The construction of the plug provides a direct soldering interface to the oxygen-free copper plug tip for end-to-end pure copper conduction. With no dissimilar materials in between the cable core and plug tip to alter your sound, you end up with the cleanest possible audio reproduction.

Mogami W3082 High Clarity Speaker cable features:

• Professional, studio grade speaker cable, built to order in west Michigan
• Various lengths available; custom lengths available upon request
• Mogami W3082 super flexible studio speaker cable; oxygen-free copper coax configuration offers self-shielding, and effectively produces 14AWG wire for superior signal transfer
• Made in the USA, nickel-plated G&H High Clarity plugs; eliminates dissimilar solder tab as found in other plugs replacing it with an oxygen-free copper tab press-fit to the oxygen-free copper core, providing end-to-end oxygen-free copper conductivity
• Limited lifetime warranty

Mogami W3082 Super Flexible Studio Speaker Cable

Coaxial Design is used to provide as large a conductor size as possible, which results in the following features:

• Large conductor size of 2.0mm (close to #14AWG) despite small OD of 6.5mm (0.256″). (Same conductor size for both internal and external (shield) conductors.)
• Oxygen-free copper, and durable outer jacket
• Better sound quality than quad or regular parallel configuration.

G&H High Clarity Plugs

The G&H High Clarity plugs are an extension of the original “Bigfoot” series 1/4” TS plugs. By eliminating the solder tab your signal has a more direct path producing a cleaner sound. The BF2PM series retains the solid, separately crimped ground of the BF2P and it’s insert molded design assure the highest reliability.

It starts with an OFC copper core for maximum conductivity. The copper is expanded into the tip for a solid connection. Then it, along with the plug body are placed into a plastic mold. The insulating material is injected into them forming a solid assembly.

Detailed Description:

• Made in the USA
• OFC copper core for highest conductivity
• 1/2” profile for highest packing density
• Tin plated ground for ease of soldering
• Solid brass housing protects the plug with attractive gun metal finish
• Separately crimped ground won’t loosen
• Hot solders directly to the copper core for clean signal transmission

Recommended maximum cable length

Calculation based on total cable resistance not exceeding 5% of speaker load impedance.

Mogami W3082 is 14AWG, and specs at 27mOhm/foot

4 ohm load – 40 feet

8 ohm load – 75 feet

16 ohm load – 150 feet

You may use the provided lengths as general guidance. If you need to run longer cables with stated loads, it is best to move up in size to the next larger gauge (smaller number) cable.

Mogami W3082 high-definition, super flexible studio speaker cable is paired with a unique oxygen-free copper cored plug in this high-quality cable assembly. The construction of the plug provides a direct soldering interface to the oxygen-free copper plug tip for end-to-end pure copper conduction. With no dissimilar materials in between the cable core and plug tip to alter your sound, you end up with the cleanest possible audio reproduction.

Mogami W3082 High Clarity Speaker cable features:

• Professional, studio grade speaker cable, built to order in west Michigan
• Various lengths available; custom lengths available upon request
• Mogami W3082 super flexible studio speaker cable; oxygen-free copper coax configuration offers self-shielding, and effectively produces 14AWG wire for superior signal transfer
• Made in the USA, gold-plated G&H High Clarity plugs; eliminates dissimilar solder tab as found in other plugs replacing it with an oxygen-free copper tab press-fit to the oxygen-free copper core, providing end-to-end oxygen-free copper conductivity
• Limited lifetime warranty

Mogami W3082 Super Flexible Studio Speaker Cable

Coaxial Design is used to provide as large a conductor size as possible, which results in the following features:

• Large conductor size of 2.0mm (close to #14AWG) despite small OD of 6.5mm (0.256″). (Same conductor size for both internal and external (shield) conductors.)
• Oxygen-free copper, and durable outer jacket
• Better sound quality than quad or regular parallel configuration.

G&H High Clarity Plugs

The G&H High Clarity plugs are an extension of the original “Bigfoot” series 1/4” TS plugs. By eliminating the solder tab your signal has a more direct path producing a cleaner sound. The BF2PM series retains the solid, separately crimped ground of the BF2P and it’s insert molded design assure the highest reliability.

It starts with an OFC copper core for maximum conductivity. The copper is expanded into the tip for a solid connection. Then it, along with the plug body are placed into a plastic mold. The insulating material is injected into them forming a solid assembly.

Detailed Description:

• Made in the USA
• OFC copper core for highest conductivity
• 1/2” profile for highest packing density
• Tin plated ground for ease of soldering
• Solid brass housing protects the plug with attractive gun metal finish
• Separately crimped ground won’t loosen
• Hot solders directly to the copper core for clean signal transmission

Recommended maximum cable length

Calculation based on total cable resistance not exceeding 5% of speaker load impedance.

Mogami W3082 is 14AWG, and specs at 27mOhm/foot

4 ohm load – 40 feet

8 ohm load – 75 feet

16 ohm load – 150 feet

You may use the provided lengths as general guidance. If you need to run longer cables with stated loads, it is best to move up in size to the next larger gauge (smaller number) cable.

Mogami W3082 high-definition, super flexible studio speaker cable is paired with a unique oxygen-free copper cored plug in this high-quality cable assembly. The construction of the plug provides a direct soldering interface to the oxygen-free copper plug tip for end-to-end pure copper conduction. With no dissimilar materials in between the cable core and plug tip to alter your sound, you end up with the cleanest possible audio reproduction.

Mogami W3082 High Clarity Speaker cable features:

• Professional, studio grade speaker cable, built to order in west Michigan
• Various lengths available; custom lengths available upon request
• Mogami W3082 super flexible studio speaker cable; oxygen-free copper coax configuration offers self-shielding, and effectively produces 14AWG wire for superior signal transfer
• Made in the USA, gold-plated G&H High Clarity plugs; eliminates dissimilar solder tab as found in other plugs replacing it with an oxygen-free copper tab press-fit to the oxygen-free copper core, providing end-to-end oxygen-free copper conductivity
• Limited lifetime warranty

Mogami W3082 Super Flexible Studio Speaker Cable

Coaxial Design is used to provide as large a conductor size as possible, which results in the following features:

• Large conductor size of 2.0mm (close to #14AWG) despite small OD of 6.5mm (0.256″). (Same conductor size for both internal and external (shield) conductors.)
• Oxygen-free copper, and durable outer jacket
• Better sound quality than quad or regular parallel configuration.

G&H High Clarity Plugs

The G&H High Clarity plugs are an extension of the original “Bigfoot” series 1/4” TS plugs. By eliminating the solder tab your signal has a more direct path producing a cleaner sound. The BF2PM series retains the solid, separately crimped ground of the BF2P and it’s insert molded design assure the highest reliability.

It starts with an OFC copper core for maximum conductivity. The copper is expanded into the tip for a solid connection. Then it, along with the plug body are placed into a plastic mold. The insulating material is injected into them forming a solid assembly.

Detailed Description:

• Made in the USA
• OFC copper core for highest conductivity
• 1/2” profile for highest packing density
• Tin plated ground for ease of soldering
• Solid brass housing protects the plug with attractive gun metal finish
• Separately crimped ground won’t loosen
• Hot solders directly to the copper core for clean signal transmission

Recommended maximum cable length

Calculation based on total cable resistance not exceeding 5% of speaker load impedance.

Mogami W3082 is 14AWG, and specs at 27mOhm/foot

4 ohm load – 40 feet

8 ohm load – 75 feet

16 ohm load – 150 feet

You may use the provided lengths as general guidance. If you need to run longer cables with stated loads, it is best to move up in size to the next larger gauge (smaller number) cable.

Mogami W3082 high-definition, super flexible studio speaker cable is paired with a unique oxygen-free copper cored plug in this high-quality cable assembly. The construction of the plug provides a direct soldering interface to the oxygen-free copper plug tip for end-to-end pure copper conduction. With no dissimilar materials in between the cable core and plug tip to alter your sound, you end up with the cleanest possible audio reproduction.

Mogami W3082 High Clarity Speaker cable features:

• Professional, studio grade speaker cable, built to order in west Michigan
• Various lengths available; custom lengths available upon request
• Mogami W3082 super flexible studio speaker cable; oxygen-free copper coax configuration offers self-shielding, and effectively produces 14AWG wire for superior signal transfer
• Made in the USA, gold-plated G&H High Clarity plugs; eliminates dissimilar solder tab as found in other plugs replacing it with an oxygen-free copper tab press-fit to the oxygen-free copper core, providing end-to-end oxygen-free copper conductivity
• Limited lifetime warranty

Mogami W3082 Super Flexible Studio Speaker Cable

Coaxial Design is used to provide as large a conductor size as possible, which results in the following features:

• Large conductor size of 2.0mm (close to #14AWG) despite small OD of 6.5mm (0.256″). (Same conductor size for both internal and external (shield) conductors.)
• Oxygen-free copper, and durable outer jacket
• Better sound quality than quad or regular parallel configuration.

G&H High Clarity Plugs

The G&H High Clarity plugs are an extension of the original “Bigfoot” series 1/4” TS plugs. By eliminating the solder tab your signal has a more direct path producing a cleaner sound. The BF2PM series retains the solid, separately crimped ground of the BF2P and it’s insert molded design assure the highest reliability.

It starts with an OFC copper core for maximum conductivity. The copper is expanded into the tip for a solid connection. Then it, along with the plug body are placed into a plastic mold. The insulating material is injected into them forming a solid assembly.

Detailed Description:

• Made in the USA
• OFC copper core for highest conductivity
• 1/2” profile for highest packing density
• Tin plated ground for ease of soldering
• Solid brass housing protects the plug with attractive gun metal finish
• Separately crimped ground won’t loosen
• Hot solders directly to the copper core for clean signal transmission

Recommended maximum cable length

Calculation based on total cable resistance not exceeding 5% of speaker load impedance.

Mogami W3082 is 14AWG, and specs at 27mOhm/foot

4 ohm load – 40 feet

8 ohm load – 75 feet

16 ohm load – 150 feet

You may use the provided lengths as general guidance. If you need to run longer cables with stated loads, it is best to move up in size to the next larger gauge (smaller number) cable.

Mogami W3082 high-definition, super flexible speaker cable is paired with road-ready G&H Bigfoot plugs in this premium cable assembly.

Mogami W3082 Classic Speaker cable features:

• Professional grade speaker cable, hand made & built to order in west Michigan
• Various lengths available; custom lengths available upon request
• Mogami W3082 super flexible studio speaker cable; oxygen-free copper coax configuration offers self-shielding, and effectively produces 14AWG wire for superior signal transfer
• Made in the USA, nickel plated G&H “Bigfoot” plugs with oxygen-free copper core with nickel shell
• Limited lifetime warranty

Mogami W3082 Super Flexible Studio Speaker Cable

Coaxial Design is used to provide as large a conductor size as possible, which results in the following features:

• Large conductor size of 2.0mm (close to #14AWG) despite small OD of 6.5mm (0.256″). (Same conductor size for both internal and external (shield) conductors.)
• Oxygen-free copper, and durable outer jacket
• Better sound quality than quad or regular parallel configuration.

G&H Bigfoot Plugs

The original “Bigfoot” series 1/4” plugs are designed to deliver a cleaner tone in a roadworthy package that spares you the embarrassment, time, and cost of having to make repairs to your audio system at an inopportune time due to plug failure. That’s lasting value.

It starts with an OFC copper core for maximum conductivity. Another advantage of the copper is that if the plug is bent the copper will stretch and not break. You can straighten it, play on and replace it later. The hot solder tab is press fit and riveted for double reliability. The ground is staked to the plug sleeve so that it can never loosen and cause crackling.

Detailed Description:

• Made in the USA
• OFC copper core for highest conductivity
• 1/2” profile for highest packing density
• Tin plated ground for ease of soldering
• Solid brass housing protects the plug with attractive nickel finish
• Separately crimped ground won’t loosen
• Hot solders directly to the copper core for clean signal transmission

Recommended maximum cable length:

Calculation based on total cable resistance not exceeding 5% of speaker load impedance.

Mogami W3082 is 14AWG, and specs at 27mOhm/foot

4 ohm load – 40 feet

8 ohm load – 75 feet

16 ohm load – 150 feet

You may use the provided lengths as general guidance. If you need to run longer cables with stated loads, it is best to move up in size to the next larger gauge (smaller number) cable.

Mogami W3082 high-definition, super flexible speaker cable is paired with road-ready G&H Bigfoot plugs in this premium cable assembly.

Mogami W3082 Classic Speaker cable features:

• Professional grade speaker cable, hand made & built to order in west Michigan
• Various lengths available; custom lengths available upon request
• Mogami W3082 super flexible studio speaker cable; oxygen-free copper coax configuration offers self-shielding, and effectively produces 14AWG wire for superior signal transfer
• Made in the USA, nickel plated G&H “Bigfoot” plugs with oxygen-free copper core with nickel shell
• Limited lifetime warranty

Mogami W3082 Super Flexible Studio Speaker Cable

Coaxial Design is used to provide as large a conductor size as possible, which results in the following features:

• Large conductor size of 2.0mm (close to #14AWG) despite small OD of 6.5mm (0.256″). (Same conductor size for both internal and external (shield) conductors.)
• Oxygen-free copper, and durable outer jacket
• Better sound quality than quad or regular parallel configuration.

G&H Bigfoot Plugs

The original “Bigfoot” series 1/4” plugs are designed to deliver a cleaner tone in a roadworthy package that spares you the embarrassment, time, and cost of having to make repairs to your audio system at an inopportune time due to plug failure. That’s lasting value.

It starts with an OFC copper core for maximum conductivity. Another advantage of the copper is that if the plug is bent the copper will stretch and not break. You can straighten it, play on and replace it later. The hot solder tab is press fit and riveted for double reliability. The ground is staked to the plug sleeve so that it can never loosen and cause crackling.

Detailed Description:

• Made in the USA
• OFC copper core for highest conductivity
• 1/2” profile for highest packing density
• Tin plated ground for ease of soldering
• Solid brass housing protects the plug with attractive nickel finish
• Separately crimped ground won’t loosen
• Hot solders directly to the copper core for clean signal transmission

Recommended maximum cable length:

Calculation based on total cable resistance not exceeding 5% of speaker load impedance.

Mogami W3082 is 14AWG, and specs at 27mOhm/foot

4 ohm load – 40 feet

8 ohm load – 75 feet

16 ohm load – 150 feet

You may use the provided lengths as general guidance. If you need to run longer cables with stated loads, it is best to move up in size to the next larger gauge (smaller number) cable.

Mogami W3082 high-definition, super flexible speaker cable is paired with road-ready G&H Bigfoot plugs in this premium cable assembly.

Mogami W3082 Classic Speaker cable features:

• Professional grade speaker cable, hand made & built to order in west Michigan
• Various lengths available; custom lengths available upon request
• Mogami W3082 super flexible studio speaker cable; oxygen-free copper coax configuration offers self-shielding, and effectively produces 14AWG wire for superior signal transfer
• Made in the USA, nickel plated G&H “Bigfoot” plugs with oxygen-free copper core with nickel shell
• Limited lifetime warranty

Mogami W3082 Super Flexible Studio Speaker Cable

Coaxial Design is used to provide as large a conductor size as possible, which results in the following features:

• Large conductor size of 2.0mm (close to #14AWG) despite small OD of 6.5mm (0.256″). (Same conductor size for both internal and external (shield) conductors.)
• Oxygen-free copper, and durable outer jacket
• Better sound quality than quad or regular parallel configuration.

G&H Bigfoot Plugs

The original “Bigfoot” series 1/4” plugs are designed to deliver a cleaner tone in a roadworthy package that spares you the embarrassment, time, and cost of having to make repairs to your audio system at an inopportune time due to plug failure. That’s lasting value.

It starts with an OFC copper core for maximum conductivity. Another advantage of the copper is that if the plug is bent the copper will stretch and not break. You can straighten it, play on and replace it later. The hot solder tab is press fit and riveted for double reliability. The ground is staked to the plug sleeve so that it can never loosen and cause crackling.

Detailed Description:

• Made in the USA
• OFC copper core for highest conductivity
• 1/2” profile for highest packing density
• Tin plated ground for ease of soldering
• Solid brass housing protects the plug with attractive nickel finish
• Separately crimped ground won’t loosen
• Hot solders directly to the copper core for clean signal transmission

Recommended maximum cable length:

Calculation based on total cable resistance not exceeding 5% of speaker load impedance.

Mogami W3082 is 14AWG, and specs at 27mOhm/foot

4 ohm load – 40 feet

8 ohm load – 75 feet

16 ohm load – 150 feet

You may use the provided lengths as general guidance. If you need to run longer cables with stated loads, it is best to move up in size to the next larger gauge (smaller number) cable.

Mogami W3082 high-definition, super flexible studio speaker cable is paired with premium ¼” TS plugs in this high quality cable assembly. Mogami cable and Neutrik plugs help to provide the most accurate audio reproduction for your studio.

Mogami W3082 Studio Gold Speaker cable features:

• Professional, studio grade speaker cable, built to order in west Michigan
• Various lengths available; custom lengths available upon request
• Mogami W3082 super flexible studio speaker cable; oxygen-free copper coax configuration offers self-shielding, and effectively produces 14AWG wire for superior signal transfer
• Genuine Neutrik NP2RX-B gold-plated right angle plugs; features unique cable clamping for effective strain relief
• Limited lifetime warranty

Mogami W3082 Super Flexible Studio Speaker Cable

Coaxial Design is used to provide as large a conductor size as possible, which results in the following features:

• Large conductor size of 2.0mm (close to #14AWG) despite small OD of 6.5mm (0.256″). (Same conductor size for both internal and external (shield) conductors.)
• Oxygen-free copper, and durable outer jacket
• Better sound quality than quad or regular parallel configuration.

Neutrik NP2RX-B ¼” TS Plugs

2 pole 1/4″ professional phone plug, gold contacts, black shell

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4″ plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). < br> The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.

Recommended maximum cable length

Calculation based on total cable resistance not exceeding 5% of speaker load impedance.

Mogami W3082 is 14AWG, and specs at 27mOhm/foot

4 ohm load – 40 feet

8 ohm load – 75 feet

16 ohm load – 150 feet

You may use the provided lengths as general guidance. If you need to run longer cables with stated loads, it is best to move up in size to the next larger gauge (smaller number) cable.